The 20 watt driver is a Class II power supply rated for operating LEDs. To avoid damage to LEDs, the number of fixtures connected must be within the range limits listed for the driver and be wired in series. Dims down to 20%. Uses 18-20 gauge wire for remote installation up to a maximum of 50 feet. National and local codes must be followed when mounting driver inside a junction box (not included).

Technical Specifications:

• 120V AC, 50/60Hz input
• 700mA DC variable current output:
  6VA, 5W for 3 (3W LEDs)
  9VA, 8W for 3 (3W LEDs)
  11VA, 10W for 5 (3W LEDs)
  14VA, 13W for 7 (3W LEDs)
  10VA, 9W for 1 (10W LED)
  13VA, 12W for 1 (15W LED)
• Driver powers 2 to 7 (3W LED fixtures, NOT for use with only one 3W LED fixture)
• Use Mark VII 0-10v dimming control (sold separately)
• Operating temperature - 40°F to 140°F
• Class II rated
• Suitable for dry location only
• Short circuit, overload, over- voltage and thermal protection.