The 240 watt driver is a Class II power supply rated for operating LEDs. It features a universal voltage input and 12 variable current outputs. 4 discrete input zones can be controlled with a Mark VII 0-10V certified dimmer. The encapsulated electronics and inherent protection adds reliability to both the driver and LEDs connected. To avoid damage to LEDs, the number of fixtures connected must be within range limits listed for the driver and be wired in series. Uses 18-20 gauge wire for remote installation up to a maximum of 150 feet. National and local codes must be followed when mounting driver inside a junction box (not included).

Technical Specifications:

• 100-277V AC, 50/60Hz input
• 700mA DC variable current output:
  6VA, 5W for 3 (3W LEDs)
  9VA, 8W for 3 (3W LEDs)
  11VA, 10W for 5 (3W LEDs)
  14VA, 13W for 5 (3W LEDs)
  17VA, 16W for 6 (3W LEDs)
  11VA, 10W for 1 (10W LED)
  17VA, 16W for 1 (15W LED)
• For 2- 6 (3Watt LED) X 12 channels
• Additional 12VA, 12W for control power supply.
• Use Mark VII 0-10v dimming control (sold separately)
• Operating temperature -4°F to 113°F
• Class II rated
• Suitable for dry location only
• Short circuit, overload, over-voltage and thermal protection.