The 36 watt driver is a Class II power supply rated for operating LEDs. It features dimmable line-voltage input and a constant current output. The encapsulated electronics and inherent protection adds reliability to both the driver and LEDs connected. To avoid damage to the LEDs, the number of fixtures connected must be within the range limits listed for the driver and be wired in series. Use 18-20 gauge wire for remote installation up to a maximum of 10 feet. National and local codes must be followed when mounting driver inside a junction box (not included).

Technical Specifications:

• 108-132V AC, 50/60Hz input
• 700mA DC variable current output:
  12VA, 11W for 3 (3W LEDs)
  18VA, 17W for 5 (3W LEDs)
  24VA, 23W for 7 (3W LEDs)
  30VA, 29W for 9 (3W LEDs)
  36VA, 35W for 11 (3W LEDs)
  15VA, 14W for 1 (10W LED)not for use with Chroma R
  27VA, 26W for 2 (10W LED) not for use with Chroma R
• Driver powers 3 to 11 (3W LED fixtures, NOT for use with only one or two 3W LED fixture)
• Line voltage forward and reverse phase dimming control
• Operating temperature -13°F to 122°F
• Class II rated
• Suitable for dry location only
• Short circuit, overload, over-voltage and thermal protection.
• See instructions link for compatible dimmers.