The "L" connector from WAC Lighting, is used to join two track sections while making a 90 degree angle turn and can be used to apply power between the joined sections of track. Available in Left-Hand and Right-Hand polarity turns. Polarity grooves are determined by the position of the power connector on the track system.

L Connector
Used to join two track sections to make a 90 degree angle, with power passed between the sections.

For L series and J series:
Looking at the track from below, with the live-end connector at the 6 o'clock position, and the L-connector inserted at the opposite end (the 12 o'clock position) the right connector bends to the 9 o'clock position and the left connector bends to the 3 o'clock position.

For H series:
Looking at the track from below, with the live-end connector at the 6 o'clock position, and the L-connector inserted at the opposite end (the 12 o'clock position) the right connector bends to the 3 o'clock position and the left connector bends to the 9 o'clock position.

If in doubt, we recommend you purchase one of each connector to avoid frustration at the time of installation. For a detailed chart of polarity grooves with WAC track, please review the following handout. For track systems which are using a Floating Canopy Connector to power the track, the Left hand polarity is recommended.

Features:

• Accepts wires from above the ceiling, with knock out for trade size connector.
• For use with WAC brand H, L and J series track systems.
• Available in Black, Brushed Nickel, Dark Bronze and White finishes.