This remote magnetic transformer converts standard 120 or 277 volt line voltage to 24 volts, providing the necessary voltage for powering MonoRail, Kable Lite, Wall MonoRail or FreeJack low-voltage lighting system. This remote magnetic transformer can be used to power lamps totaling up to 600 watts. This transformer is equipped with fast-acting secondary circuit breaker that will safely turn off the system should a short occur. Once the short has been removed the breaker can be reset.

This transformer must be installed in a remote but accessible location (such as ceiling or closet). To simplify installation the transformer should be located no more then 20 feet from the run or power feed. The electrician will need to supply the proper gauge conductor from the transformer to the power feed location based on distance.

Can be ordered to hard wire to a junction box or to plug in with a 16 foot power cord with plug. This transformer provides a single 600 watt output and must be used with a single-feed canopy or other power feed option (sold separately).